In Rows option, Analog Input Configuration
dialog box, 4-6
installation
adding DAQ Add-In manually, 1-3
removing DAQ Add-In manually, 1-3
steps for installation, 1-2
uninstalling Measure, 1-3
interchannel delay
specifying, 4-10
L
Low Limit field
Advanced Analog Output configuration
dialog box, 5-4
Analog Input Configuration dialog box,
4-4
M
manual. See documentation.
Measure
installing, 1-2 to 1-3
overview, 1-2
uninstalling, 1-3
using with DAQ devices, 1-1
Microsoft Excel error message after
removing DAQ Add-In manually,
C-2
Mode button, Analog Input Configuration
dialog box, 4-7
mode selection, in Analog Input Mode
dialog box, 4-8 to 4-9
multiplexed operating mode, SCXI, 3-1
N
NI-DAQ driver software, configuring, 1-1
Non-Referenced Single-Ended Channels
option, Analog Input Mode dialog
box, 4-9
Number of iterations field, Analog Output
Configuration dialog box, 2-6, 5-2
Number of scans field, Analog Input
Configuration dialog box, 2-4, 4-4
O
operating modes, SCXI modules, 3-1 to 3-3
P
parallel operating mode, SCXI, 3-1
R
Referenced Single-Ended Channels field,
Analog Input Mode dialog box, 4-9
Remove button, Analog Output
Configuration dialog box, 5-2
removing DAQ Add-In manually, 1-3
Excel error message, C-2
round robin scanning (figure), 4-5
Run button
DAQ Tasks dialog box, 2-5, 2-7, 2-10
S
saving tasks, 2-8 to 2-9
Scale to volts checkbox, Analog Input
Configuration dialog box, 4-4
scan clock, external. See clocks.
scan list, analog input, 2-3, 4-2 to 4-4
scan rate
selecting number of scans per second, 4-5
setting, 2-4, 4-4 to 4-5
scans, specifying number for acquisition,
2-3 to 2-4, 4-4
scans after trigger field, Hardware Digital
Trigger dialog box, 4-8
Scans/second field, Analog Input
Configuration dialog box, 2-4, 4-5
SCXI modules. See also DAQ hardware
capabilities.
analog input, 3-2 to 3-4
channel strings syntax (table), 3-4