-10632 someInputsIgnoredErr Certain inputs were ignored because
they were not relevant in the current
operating mode.
-10633 invalidRegenModeErr The specified analog output
regeneration mode is not allowed for
this device.
-10634 noContTransferInProgressE
rror No continuous (double buffered)
transfer is in progress for the specified
resource.
-10635 invalidSCXIOpModeError Either the SCXI operating mode
specified in a configuration call is
invalid, or a module is in the wrong
operating mode to execute the function
call.
-10636 noContWithSynchError You cannot start a continuous (double-
buffered) operation with a
synchronous function call.
-10637 bufferAlreadyConfigError Attempted to configure a buffer after
the buffer had already been
configured. You can configure a buffer
only once.
-10680 badChanGainErr All channels of this device must have
the same gain.
-10681 badChanRangeErr All channels of this device must have
the same range.
-10682 badChanPolarityErr All channels of this device must have
the same polarity.
-10683 badChanCouplingErr All channels of this device must have
the same coupling.
-10684 badChanInputModeErr All channels of this device must have
the same input mode.
-10685 clkExceedsBrdsMaxConvRate The clock rate exceeded the device’s
recommended maximum rate.
-10686 scanListInvalidErr A configuration change has invalidated
the scan list.
-10687 bufferInvalidErr A configuration change has invalidated
the allocated buffer.