-10244 deviceInitErr The driver encountered a hardware-
initialization error while attempting to
configure the specified device.
-10245 osInitErr The driver encountered an operating-
system error while attempting to perform
an operation, or the operating system
does not support an operation performed
by the driver.
-10246 communicationsErr The driver is unable to communicate
with the specified external device.
-10247 DSPcmosConfigErr Possible reasons for this error are as
follows.
• The CMOS configuration-memory
for the device is empty or invalid.
• The configuration specified does not
agree with the current configuration
of the device.
• The EISA system configuration is
invalid.
-10248 dupAddressErr The base addresses for two or more
devices are the same; consequently, the
driver is unable to access the specified
device.
-10249 intConfigErr The interrupt configuration is incorrect
given the capabilities of the computer or
device.
-10250 dupIntErr The interrupt levels for two or more
devices are the same.
-10251 dmaConfigErr The DMA configuration is incorrect
given the capabilities of the
computer/DMA controller or device.
-10252 dupDMAErr The DMA channels for two or more
devices are the same.
-10253 jumperlessBoardErr The driver is unable to find one or more
jumperless devices that you have
configured using WDAQCONF.EXE.