NDC comm CompuFax user manual = Run Length Encoding = N o Compression, Ote, Queue, Sheetfeed

/ SCALE

Format:

/ RECEIVE Format:

1 = Run Length Encoding

0 = N o Compression

If the / BEST_WAY qualifier is also enabled, the actual method used may vary between zero and the number selected above.

/ N OTE
Format:	/ NOTE= "string"
Description:	Specifies a message string of up to 131 characters, which will print at the top of the flag
page, provided the / FLAG qualifier has been enabled.
/ N OTIFY
Format:	/ NOTIFY (D)
	/ NONOTIFY
Description:	Controls whether a message will be broadcast when the printing of a fax file starts and
completes.
/ QUEUE
Format:	/ QUEUE= queue-name[:]
Description:	This qualifier determines the queue name of the fax printer queue. If not specified, the

default queue name is FAX$PRINT. If the fax printer is also the system printer, you may wish to change the queue name to SYS$PRINT or other queue name. In any case, the name specified must exist as an actual print queue name. Refer to VMS documentation on how to create print queue.

/ RECEIVE

/ NORECEIVE (D)

This qualifier determines whether received faxes are printed. The default is / NORECEIVE, since not every system may have a fax printer. When using the / NORECEIVE printer option, it is recommended also to disable the receipt of faxes altogether, since received data can soon fill up a disk. See the DEVICE command help on how to do this.

/ SCALE (D)

/ NOSCALE

Description: The resolution of a typical laser printer is 300 dots per inch while a fax image is about 200 dpi, which would cause printing to occur at about two-thirds of the correct dimensions. The / SCALE qualifier adjusts the size of the image. Where reducing system overhead is more important than the dimensions of the printed image, you may prefer to use / NOSCALE.

/ SEN D
Format:	/ SEND
	/ NOSEND (D)
Description:	This qualifier determines whether sent faxes will be printed. This feature may be used to

check what faxes are being sent. Printing starts immediately after file conversion; therefore this option does not guarantee that a printed fax has in fact been sent successfully. In addition to this feature, a / PRINT qualifier has been added to the SEND command, which permits a single outgoing fax to be printed.

/ SHEET_FEED

Format:	/ SHEET_FEED
	/ NOSHEET_FEED (D)
Description:	When you wish to print on a different size or stock of paper than what is loaded in the tray,

you may set this qualifier to / SHEET_FEED, in which case the printer requires a manual start from the control panel prior to printing each page.

5 0