1.4.4 Rem ot e Fax Server Set up

Configure the Remote Fax Server startup options to indicate the node(s) you have designated as your Full Device Server systems(s). Edit the Remote Fax Server startup command file to include the node name(s) of the system(s) this node will use as Full Device Server for transmitting faxes:

$ EDIT FAX$DIR:FAX_REMSTART.COM

Search for the line containing "**" and add the node name(s).

Here is an example of the line that should be modified:

$ DEFINE/ SYSTEM/ NOLOG FAX$SERVER_NODE NODE1, NODE2 !**Change NODE1 ... to your

!node name(s) with Fax Device Full servers.

1.5 Remote Fax Server Startup

The startup command file will inform the CompuFax Remote Fax Server process which system has been designated as the Full Device Server system.

Start the CompuFax remote server process: $ @FAX$DIR:FAX_REMSTART

Invoke the command below to create the symbol FAX as a command: $ @FAX$DIR:FAX_SYLOGIN

Enter the @FAX$DIR:FAX_REMSTART command into your system startup command file and the @FAX$DIR:FAX_SYLOGIN into your system-wide login file, which will cause the CompuFax software to be started each time the system is rebooted.

Verify that the CompuFax Remote Fax Server software is running:

$ FAX SHOW SERVER

CompuFax remote server up since 3-JUL-1995 12:34:35 FAX server nodes assigned to this node:

TEST

Current FAX server node is TEST

If the Server node is not displayed, check that the Full Device Server processes are running.

6

Page 20
Image 20
NDC comm CompuFax Remote Fax Server Startup, Rem ot e Fax Server Set up, $ Edit FAX$DIRFAXREMSTART.COM, $ FAX Show Server