NEC 760417 manual To redirect a new message, To redirect an old message

Issue 1 NEC America, Inc.

To redirect a new message:

1.Listen to the message long enough to determine who it is for.

2.Press 2 to interrupt the message.

3.When the system asks if you would like to redirect the message, press 1 for Yes, and then enter the appropriate mailbox as prompted.

4.Press 1 to confirm.

5.If needed, record an introduction when prompted.

To redirect an old message:

1.When the system says, “You have <number> messages to review. Would you like to check them?” Press 1 for Yes.

2.Listen to the message long enough to determine who it is for.

3.Press 2 to interrupt the message.

4.When the system asks if you would like to redirect the message, press 1 for Yes, and then enter the appropriate mailbox as prompted.

5.Press 1 to confirm.

6.If needed, record an introduction when prompted.

Transferring External Callers To A Voice Mailbox:

Your operator transfers external callers to subscribers’ voice mailboxes. The operator’s procedure differs depending on whether easy message access is enabled.

To transfer an external caller to a voice mailbox on systems not using easy message access:

1.Press the transfer key.

2.Dial 50.

3.When InfoSet 408 Voice Mail answers, dial the mailbox number you want and then press 2 to place the caller directly into the voice

4 - 4 InfoSet 408 System Manager’s Guide