NEAX2400 IPX ISDN Features and Specifications
Page 120 NDA-24311, Issue 1
S-85 Speed Calling - Group - PRI
S-85 Speed Calling - Group - PRI
General Description
This feature allows a user to sh are a group of common ISDN netwo rk Speed Calling numbers with oth er members
in the group.
Operating Procedure
1. Lift handset; receive dial tone.
2. Dial the Speed Calling access code (one or two digits).
3. Dial the abbreviated call code (on e or two digits).
4. Call is completed.
To operate from a Dterm
1. Press the Redial key; receive dial tone. The LCD displays:
2. Press the desired call code; call is completed.
Service Conditions
1. A maximum of 100 memory blocks per Module Group can be equipped for SPEED CALLING - GROUP.
A maximum of 10 Speed Calling numbers per memory block can be assigned.
2. A station is assigned blocks as primary stations, and associate stat ions to th at group as sec ondary stat ions.
The primary station can program 10 memory blocks commonly used as Speed Calling numbers for that
group; therefore, a group can consist of 100 Speed Calling numbers maximum.
3. Each abbreviated call code can store a maximum of 24 digits, including access codes.
4. A station can be assigned as a primary station for only one group of memory blocks.
5. There is no limit to the number of secondary stations assigned to one Primary group.
6. Secondary and primary stations must belong to the same Module Group.
7. A secondary station can only be assigned to one Primary group.
8. TOLL DENIAL/TOLL DIVERSION and TOLL RESTRICTION - 3/6-DIGIT [T-40] may or may not be
applied to Speed Calling, as desired.
9. LEAST COST ROUTING - 3/6-DIGIT [L -3 1] can be provided via Speed Calling access.
10. SPEED CALLING - GROUP - PRI and SPEED CALLING - STATION - PRI [S-84] use the same block
of memory tables.
11. SPEED CALLING - GROUP - PRI data remains even if system is reinitialized or in the event of a power
failure.
12. A pause can be programmed using the * button of a PB pad. This uses one of the 24 digits availa ble. Rotary
type phones cannot store a pause. A pause lasts 2.8 seconds.
13. A user cannot dial the called party subaddress as abbreviated codes.
(Time Display)
LNR[ # ] / SPEED [ _ _ ]