NEAX2400 IPX ISDN Features and Specifications
Page 78 NDA-24311, Issue 1
L-42D Last Number Call - Dterm - PRI
L-42D Last Number Call - Dterm - PRI
General Description
This feature allows a Dterm user to redial the numbers previously dialed from the terminal. With this feature, the
Dterm user can choose any destination out of the latest 5 calls stored in system memory, and place a call without
having to redial the full number.
Operating Procedure
To check the dialed numbers stored in the memory (up to 5 destinations)
1. Press the Redial key on a Dterm.
a.) The Prime Line lights Green.
b.) The Speaker Lamp lights Green.
c.) Receive dial tone from the speaker with the following display on the Dterm.
2. Press the Redial key on the Dterm again.
a.) The Prime Line lights Green.
b.) The Speaker Lamp lights Green.
c.) Receive dial tone from the speaker with the following display on the Dterm.
Note: The indication on the display is changed in sequence by pressing the Redial key. Once the stored number display
reaches LNR[#]/SPEED[]-5, LNR[#]/SPEED[]-1 appears again by pressing the Redial key.
To originate a call:
1. Press the Redial key on a Dterm.
a.) The Prime Line lights Green.
b.) The Speaker Lamp lights Green.
c.) Receive dial tone from the speaker with the following display on the Dterm.
2. Repeat the above procedure until you reach your desired destination.
LNR [#] / SPEED [_ _ _] - 1
811625643
MIC FDB FDN >>>
LNR [#] / SPEED [_ _ _] - 2 25191
MIC FDB FDN >>>
LNR [#] / SPEED [_ _ _] - 1
811625643
MIC FDB FDN >>>
LNR [#] / SPEED [_ _ _] - 4
82625191
MIC FDB FDN >>>