NEAX2400 IPX ISDN Features and Specifications
Page 30 NDA-24311, Issue 1
C-100 Consultation Hold - All Calls - PRI
C-100 Consultation Hold - All Calls - PRIGeneral Description
This feature permits a user to hold any incoming or outgoing ISDN network call, or any intra-office call, while
originating a call to another station within the system.
Operating Procedure
To hold the original call and place a second call
1. Press the switchhook; receive special dial tone. The original call is held.
2. Dial the second telephone number; receive ringback tone.
3. The second station answers; the Consultation Hold state has been entered.
To return to the original call
1. In any of the following cases, the calling station can return to the original cal l by pressing th e switch hook:
a.) The second station called for consultation is busy.
b.) The calling station cannot gain access to second station due to restriction or any other reason.
c.) Second station does not answer.
2. If the second party hangs up, the calling station will automatically be returned to the original call.
If the originating station flashes the switchhook, THREE-WAY CALLING [T-2] will be initiated.
Service Conditions
1. When TRUNK-TO-TRUNK CONNECTION [T-10] is provided with the system, an outgoing exchange
network or Tie Line call can be made by the user.
2. In the case of outgoing calls, this feature can be activated only after 18 seconds have el apsed since the last
digit dialed.
3. CALL PICKUP - GROUP - PRI [C-97] is available on Consultation Hold.