NEAX2400 IPX ISDN Features and Specifications
NDA-24311, Issue 1 Page 79
Last Number Call - Dterm - PRI L-42D
Operating Procedure (cont’d)
3. Press # to originate your call while the desired destination is being displayed on the Dterm.
a.) The Prime Line lights Green.
b.) The Speaker Lamp lights Green.
c.) Receive ringback tone from the speaker with the following display on the Dterm.
4. The called party answers the call.
a.) The Prime Line lights Green.
b.) The Speaker Lamp is OFF.
Service Conditions
1. A maximum of 32 digits can be stored, including pause. (The first 24 digits are displayed on the LCD.)
2. This service can be activated on a station basis.
3. In a Step Call, the final combination of digits represents the st ored memory. For examp le, di al 201; 201 i s
busy. Dial 2; X-202 rings; X-202 is stored in LAST NUMBER redial memory.
4. In the case of CALL FORWARDING - BUSY LINE [C-2], CALL FORWARDING - DON’T ANSWER
[C-3], CALL FORWARDING - ALL CALLS [C-5], CALL PICKUP - GROUP [C-7], and STATION
HUNTING - CIRCULAR [S-7], STATION HUNTING - SECRETARIAL [S-8], STATION TERMINAL
[S-9], the number stored is the number dialed; i.e., intermediate station.
5. The numbers (maximum of five) are store d in the me mory in th e orde r dial ed. If the n umb er ide ntic al to
the one in the memory is dialed, that number is recognized as the newest number, and the one already
stored will be erased. (No matter how many times the same number is dialed, it is stored only once.)
6. This service is not available if the LAST NUMBER feature key is not assigned on the Dterm
7. When the Redial key is pressed after all of the stored numbers are displayed, the newest number (the one
displayed first) is displayed again, and continues in the same order.
8. When no number is stored in the memory (e.g., after the package initialization), the LCD displays as
follows:
9. If no key is pressed after the Redial key for 12 seconds, the interdigit timer expires, and the user receives
busy tone or reorder tone.
10. If any other key than # is pressed after the Redial key, it is recognized as a speed calling number.
11. If the SPEAKER key is pressed after the Redial key, the user is released from the service.
82625191
10:24 AM FRI 15
82625191
10:24 AM FRI 15
LNR [#] / SPEED [_ _ _] - 1
MIC FDB FDN >>>
blank