NEAX2400 IPX ISDN Features and Specifications
Page 142 NDA-24311, Issue 1
C-104 Calling Party Recognition Service (Direct-In-Termination (DIT))
C-104 Calling Party Recognition Service (Direct-In-Termination (DIT))General Description
This feature provides an incoming DIT call via an ISDN trunk to be connected to a predetermined station. This
application can be used for a station, modem, or data call.
Operating Procedure
No manual operation is required.
Service Conditions
1. For incoming calls in a Primary Rate Interface trunk, this service feature is activated when the called
number is not present in the setup message. This would occur when a DID call does not provide the sub-
address service. The call is then terminated to a DIT station assigned to that incoming trunk.
2. This service is not available when the destination telephone number exceeds 13 digits.