NEAX2400 IPX ISDN Features and Specifications
NDA-24311, Issue 1 Page 49
Data Interface - Automatic Answer - PRI D-119
D-119 Data Interface - Automatic Answer - PRI
General Description
This feature enables incoming ISDN data calls to be answered automatically by a Data Module or Dterm/Data
Adapter.
Operating Procedure
To set DATA INTERFACE - AUTOMATIC ANSWER - PRI, select the Attribute Data Entry or change the switch
setting for Auto Answer.
The Dterm/Data Adapter can be set in two ways
1. Set the Dterm/Data Adapter for Auto Answer by changing the Terminal Attribute Data II:
a.) Press the DATA key. The DATA lamp lights steadily and the display shows D.
b.) Press the DTX key (or ANSWER key). The DTX lamp (or ANSWER lamp) lights steadily.
c.) The display shows DATA SET.
d.) Key in 00. The display shows ER CHECK XX YY. Press the # key.
e.) The display shows AUTO ANS 01 YY.
f.) Key in 01. The display shows AUTO ANS 01 01.
g.) Press the # key, and service set tone (two beeps) is heard. Press the DATA key.
h.) Auto Answer Setup is complete.
2. Set the Dterm/Data Adapter for Auto Answer by pressing the DSPY/AUTO key:
a.) Press the DSPY/AUTO key. The DSPY/AUTO lamp lights steadily.
b.) Auto Answer Setup is complete.
Note: ER = DTR
To set the Data Module for Auto Answer using di p sw itch # SW- 1 in the rear of t he unit ( Att ribut e Da ta E ntry via
keyboard is ignored, switch settings override keyboard entry):
1. Set Sw1-2 to the OFF position; (SW1-2: ON=Manual Answer).
2. Reset the Data Module Power ON/OFF/ON.
In the Auto Answer mode, data communication can be started when the Data Module (DM) connected DTE display
shows INCOM DTE XXXX.
In the Auto Answer mode, data communication can be started when the Dterm display shows:
and
(Time Display)
D XXXX
DTE
(Time Display)
READY XXXX
DDTE