Wireless Repeating Function | NETGEAR DGND4000 instruction

N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000

Wireless Repeater. The wireless modem router sends all traffic from its local wireless or wired computers to a remote access point. To configure this mode, you have to know the MAC address of the remote parent access point.

The DGND4000 wireless modem router is always in dual-band concurrent mode, unless you turn off one radio. If you enable the wireless repeater in either radio band, the wireless base station or wireless repeater cannot be enabled in the other radio band. However, if you enable the wireless base station in either radio band and use the other radio band as a wireless wireless modem router or wireless base station, dual-band concurrent mode is not affected.

For you to set up a wireless network with WDS, the following conditions have to be met for both access points:

•Both access points have to use the same SSID, wireless channel, and encryption mode.

•Both access points have to be on the same LAN IP subnet. That is, all the access point LAN IP addresses are in the same network.

•All LAN devices (wired and wireless computers) have to be configured to operate in the same LAN network address range as the access points.

Wireless Repeating Function

1.Select ADVANCED > Advanced Setup > Wireless Repeating Function.

2.To view or change wireless repeater settings for the wireless modem router

a.Enable Wireless Repeating Function. Select the check box for the 2.4 GHz or 5-GHz network to use the wireless repeating function.

b.Disable Wireless Client Association. If your wireless modem router is the repeater, selecting this check box means that wireless clients cannot associate with it. Only LAN client associations are allowed.

Advanced Settings

106

Image 106

NETGEAR DGND4000 user manual Select Advanced Advanced Setup Wireless Repeating Function

Contents

N750 WiFi DSL Modem Router Premium Edition Compliance SupportTrademarks Contents USB Printer Control Administration Appendix a Supplemental Information Hardware Setup Get to know your wireless router Product Specifications Weee Hardware Setup Box contents Unpack Your New Router Hardware Features Label Back Panel Back panel port connections Front Panel Front panel LEDs Wireless button GHz Wireless LED Position Your Wireless Router Power On/Off LED Adsl Microfilters One-Line Adsl Microfilter Not Included Two-Line Adsl Microfilter Included Cable Your N750 Wireless Modem RouterSummary Verify the Cabling Connect to Internet with Adsl or Ethernet WAN Get Started with Netgear genie Wireless Devices and Security Settings Prepare to Set Up the Wireless Modem RouterTypes of Logins and Access Use Standard TCP/IP Properties for Dhcp Browse to http//routerlogin.net Netgear genie Setup To use Netgear genie to set up your wireless modem router  If the browser cannot display the web Use Netgear genie after Installation Upgrade Wireless Modem Router Firmware Wireless Modem Router Dashboard Basic Home Screen Manual Method Add Wireless Devices or Computers to Your NetworkWi-Fi Protected Setup WPS Method  To connect manually  To use WPS to join the wireless network Netgear genie Basic Settings Your Internet connection and network Internet Basic Settings Screen Fields Internet Basic SettingsDoes Your ISP Require a Login? Answer either yes or no Attached Devices Internet IP Address Netgear genie Basic Settings Parental Controls USB Storage Basic Settings ReadySHARE USB Storage and Printer Basic Wireless Settings ReadySHARE Printer  To view or change basic wireless settings Wireless Settings Screen Fields Wireless Network Security Options Settings Change WPA Security Option and Passphrase  To set up a guest network Guest Networks Guest Network Wireless Security Options Netgear genie App  To install the genie mobile app Netgear genie Mobile App Specify custom settings Netgear genie Advanced Home Setup Wizard Select Setup Wizard Netgear genie Advanced Home  To use the WPS Wizard Select Advanced WPS Wizard WPS WizardSelect either Push Button or PIN Number VPN Wizard  To use the VPN Wizard Select Advanced VPN Wizard Netgear genie Advanced Home Setup Menu Adsl Setup Select Advanced Setup Adsl Settings WAN Setup Select Advanced Setup WAN Setup  To set up a default DMZ server Default DMZ ServerChange the MTU Size  To change the MTU size Select Advanced Setup WAN Setup Common MTU sizes LAN Setup  To change the LAN settings Select Advanced Setup LAN Setup LAN TCP/IP Setup LAN Setup Screen SettingsUse the Wireless Modem Router as a Dhcp Server Use Router as a Dhcp Server Address Reservation  To reserve an IP address Enable WMM QoS for Wireless Multimedia Applications Quality of Service SetupSelect Advanced Setup QoS Setup  To create a QoS policy for applications and online games Set Up QoS for Internet AccessQoS for Applications and Online Gaming Priority Rule Netgear genie Advanced Home Click the Add Priority Rule button QoS for a Wireless Modem Router LAN PortQoS for a MAC Address Click Add Priority Rule Edit or Delete an Existing QoS Policy  To edit or delete a QoS policy Access and configure a USB storage drive USB Storage ReadySHARE Access USB Drive Requirements Store Files in a Central Location for Printing File-Sharing ScenariosShare Photos  To share files with your friends and family USB Storage Basic Settings Share Large Files over the Internet  To access your USB device Add or Edit a Network Folder USB Storage Advanced Settings Safely Remove a USB Drive Available Network Folders Media Server Settings Specify Approved USB Devices Select the Allow only approved devices check box Connect to the USB Drive from a Remote ComputerFtp//10.1.65.4 Access and configure a USB printer USB Printer Control USB Printer Control Select Tools Configuration Control Center ConfigurationUSB Printer Scan with a Multifunction Printer Keep unwanted content out of your Security  To delete a keyword or domain Keyword Blocking of Http TrafficSelect Advanced Security Block Sites  To specify a trusted computer Firewall Rules Security Add Custom Services to Allow or Block  To add a custom service TCP UDP TCP/UDP Schedule for Firewall Rules Security Event Email Notifications Administration Manage your network Upgrade the Wireless Modem Router Firmware Internet Port View Wireless Modem Router StatusRouter Information LAN Port Show Statistics Button System up time and poll interval statistics Wireless Settings 2.4 GHz and Wireless Settings 5 GHz Connection Status Button Guest Network 2.4 GHz and Guest Network 5 GHz Select Advanced Administration VPN Status View Logs of Web Access or Attempted Web AccessView VPN Status Manage the Configuration File Select Advanced Administration Logs  To restore configuration settings that you backed up Back Up SettingsRestore Configuration Settings Do not interrupt the reboot process Set Password Password Recovery Diagnostics Administration  To set up Time Machine Set Up Time MachineTime Machine Access the Connected USB Hard Drive  To access the drive Time Machine Before You Back Up a Large Amount of Data Administration Select Guid Partition Table or Master Boot Record MBR Select Volume SchemeChange the Partition Scheme Advanced Settings Fine-tuning your network Advanced Wireless Settings Select Advanced Advanced Setup Wireless Settings Advanced Settings 103 Advanced Settings 104 Wireless Repeating Function WDS Wireless repeating scenario Wireless Repeating Function Select Advanced Advanced Setup Wireless Repeating Function Set Up the Base Station  To set up the base station Set Up a Repeater Unit  To configure the wireless modem router as a repeater unit Remote Computer Access Basics Port Forwarding and Triggering Port Triggering to Open Incoming Ports Advanced Settings 111 Port Forwarding to Permit External Host Communications  To set up port forwarding Set Up Port Forwarding to Local ServersHow Port Forwarding Differs from Port Triggering Advanced Settings 114 Click Edit Service or Delete Service Add a Custom ServiceClick the Add Custom Service button Edit or Delete a Port Forwarding Entry Application Example Making a Local Web Server Public Set Up Port Triggering To make a local web server public Advanced Settings 117 Click Add Service Dynamic DNS Select the Use a Dynamic DNS Service check box  To set up Dynamic DNSStatic Routes  To set up a static route Advanced Settings 121 Remote Management USB Settings Universal Plug and Play Advanced Settings 124 IPv6 Traffic Meter Advanced Settings 126 Device Mode VPN Policies Advanced Settings 128 Add or Edit an Auto VPN Policy IKE Fully Qualified Domain Name. Your domain name Parameters Add or Edit a Manual VPN Policy Advanced Settings 133 Troubleshooting Diagnose and solve problems Quick Tips Wireless SettingsNetwork Settings Sequence to Restart Your Network Power LED Stays Red Power LED Is Off or BlinkingTroubleshoot with the LEDs Internet or Ethernet Port LEDs Are Off Wireless LEDs Are OffLEDs Never Turn Off Push N Connect WPS Button Blinks Green Cannot Access the Internet Cannot Log In to the Router Troubleshooting 139 Troubleshoot Internet Browsing Troubleshoot PPPoE To troubleshoot a PPPoE connection Changes Not Saved Wireless ConnectivityIncorrect Date or Time Wireless Signal Strength Restore the Factory Settings and PasswordTroubleshoot Your Network Using the Ping Utility Test the LAN Path to Your Router Test the Path from Your Computer to a Remote Device Troubleshooting 144 Specifications Supplemental Information Factory Settings Factory default settings Supplemental Information 147 Technical Specifications DGND4000 Router specifications Supplemental Information 149 Index 150 151 152 153