N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000

To set up port triggering:

1.Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.

2.Select the Port Triggering radio button to display the port triggering information.

3.Clear the Disable Port Triggering check box if it is selected.

Note: If the Disable Port Triggering check box is selected after you configure port triggering, port triggering is disabled. However, any port triggering configuration information you added to the wireless modem router is retained even though it is not used.

4.In the Port Triggering Timeout field, enter a value up to 9999 minutes.

This value controls the inactivity timer for the designated inbound ports. The inbound ports close when the inactivity time expires. This closure is required because the wireless modem router cannot be sure when the application has terminated.

Advanced Settings

117

Page 117
Image 117
NETGEAR DGND4000 user manual Advanced Settings 117