N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000

Waiting to Connect. You need to connect to this device from the computer that you are using. If you are connecting for the first time, you might be prompted to install the device driver.

The following menu selections are available:

System. Exit the utility.

Tools. Access the Control Center Configuration to set up your shared USB device. See Control Center Configuration.

About. View details about the USB Control Center software.

Control Center Configuration

1.Select Tools > Configuration.

2.Set up these features:

Automatically execute when logging on Windows. Select this check box to have the utility start automatically when you are logged in to Windows.

Timeout. Specify the time-out value for holding the USB resource when it is not in use.

Language. Select the display language for this utility.

USB Printer

The first time you use a printer, you need to click Connect. You might be asked to install the driver for this printer. After the driver is installed, the printer status changes to Available.

USB Printer Control

73

Page 73
Image 73
NETGEAR DGND4000 user manual Control Center Configuration, USB Printer, Select Tools Configuration