
ASTRO® XTS™ 5000
Digital Portable Radio, Model II
Quick Reference Card
Product Safety and RF Exposure Compliance
Before using this product, read the operating instructions
!for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio.
ATTENTION!
This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 68P81095C98) to ensure compliance with RF energy exposure limits.
Radio On/Off
1On - On/Off/Volume knob clockwise.
2Off - On/Off/Volume knob counterclockwise.
Zones/Channels
1Zone - Zone switch to desired zone.
2Channel - Channel switch to desired channel.
Receive/Transmit
When acknowledgment is received, you hear four beeps; alarm ends; radio exits emer- gency.
Send Emergency Call
1Radio on and press Emergency button.
Note: To exit emergency at any time, press and hold Emergency button.
2 | Press and hold PTT. Announce your |
| emergency into the microphone. |
Concentric Switch
_ _ _ _ _ _
On/Off/ Volume Knob
Top Side Button
_ _ _ _ _ _ _
Side Button 1
_ _ _ _ _ _ _
Side Button 2
_ _ _ _ _ _ _
PTT Button
Home Button
_ _ _ _ _ _ _
Top Button
_ _ _ _ _ _ _
Switch
_ _ _ _ _ _ _
Speaker/Mic
Display
Menu Select
Buttons
App Button
(TMS Button)
1Radio on and select zone/channel.
2Listen for a transmission.
- or -
Press and hold Volume Set button. - or -
Press Monitor button and listen for activity.
3Adjust volume, if necessary.
4Press PTT to transmit; release to receive.
Send Emergency Alarm
Radio on and press Emergency button. Display shows current zone/channel and EMERGENCY. Red LED lights; you hear short,
Note: To exit emergency at any time, press and hold Emergency button.
3 | Release PTT to end call. |
4 | Press and hold Emergency button to exit |
| emergency. |
|
|
Send Silent Emergency Alarm
1Radio on and press Emergency button. Display does not change; you see no LED; you hear no tone.
Note: To exit emergency at any time, press and hold Emergency button.
2Silent emergency continues until you:
•Press and hold Emergency button to exit emergency state.
- or -
•Press and release PTT to exit silent emergency and enter regular emergency (alarm, call, or alarm with call).
Write your radio’s programmed features on the dashed lines.