44 Chapter 3 Installing and configuring Desktop Messaging
Configuring Netscape Messenger 6.2
If the subscriber uses Netscape Messenger version 6.2 as their Internet Mail client, use these procedures. If the subscriber uses Netscape Messenger version 4, refer to “Configuring Netscape Messenger 4.x” on page 41.
Notes:
•If the subscriber uses Netscape with POP for email, Netscape cannot be configured with IMAP at the same time. You must set up a different Netscape subscriber profile.
•If the subscriber uses Netscape for their email, Netscape cannot be configured to send mail to CallPilot, since only one SMTP server can be configured. You must set up a different Netscape subscriber profile.
Configuring an IMAP account on Netscape Messenger
1Start Netscape Messenger.
2On the Tasks menu, select Mail & Newsgroups.
If there are no email accounts configured the Account Wizard appears. If the Account Wizard appears, go to step 4. Otherwise the Mail & Newsgroups window appears.
3On the File menu, select New and click Account.
4Select ISP or email provider and click the Next button.
5In the Your name box, type the subscriber’s name.
6In the Email address box enter the subscriber’s email address in the form <SMTP/VPIM prefix><mailbox number>@<local CallPilot 100/150 system> For example: 198887002@voiceuser.factor.com, where:
•19888 is the SMTP/VPIM prefix
•7002 is the subscriber’s CallPilot mailbox number
•voiceuser.factor.com is the FQDN of the CallPilot 100/150 system. If your network does not use DNS then use <hostname>.localdomain as the FQDN (where hostname is that of the CallPilot 100/150 system).
7Click the Next button.
The Server Information page appears.
8In the Incoming Server section, select IMAP.
9In the Server Name box type the FQDN of the CallPilot 100/150 system. If your network does not use DNS enter the IP address (in the form N.N.N.N) instead of the FQDN.
10In the Outgoing Server (SMTP) section, in the Server Name box type the FQDN of the CallPilot 100/150 system. If your network does not use DNS, type the IP address instead of the FQDN.
11Click the Next button.
The User Name page shows the subscriber’s mailbox number (the part of the subscriber’s CallPilot mail address that comes before the @ sign).
N0008714 02
