150 Chapter 3 Using the console interface

208700-B

•To go to the next screen in a series, press [Ctrl]-N.

•To return to the main menu at any time, press [Ctrl]-C.

•Press [Backspace] to delete entered text.

•Options that appear in brackets (for example, [Enabled]) are user-settable

options.

Screen fields and descriptions

Figure 50 shows a map of the CI screens. The remainder of this chapter describes

the CI screens and their fields, beginning with the main menu.

Figure 50 Map of console interface screens

IP Configuration/Setup
SNMP Configuration
System Characteristics
Switch Configuration
Console/Comm Port Configuration
Identify Unit Numbers
Renumber Stack Units
Display Hardware Units
Spanning Tree Configuration
TELNET/SNMP/Web Access Configuration
Software Download
Configuration File
Display Event Log
Reset
Reset to Default Settings
Command Line Interface
Logout
Main Menu MAC Address Table
MAC Address Security Config.
EAPOL Security Configuration
VLAN Configuration
Port Configuration
High Speed Flow Control Config.
MultiLink Trunk Config.
Port Mirroring Configuration
Rate Limiting Configuration
IGMP Config.
Display Port Statistics
Clear All Port Statistics
Stack Operational Mode
Spanning Tree Group Configuration
Spanning Tree Port Configuration
Display Spanning Tree Switch Settings
Display Spanning Tree VLAN Membership
Configuration File Download/Upload
Ascii Configuration File Download
VLAN Configuration
MAC Add. for MAC-SA Based VLAN
VLAN Port Configuration
VLAN Display by Port
MultiLink Trunk Configuration
MultiLink Trunk Utilization
IGMP Configuration
Display Multicast Group Membership
10450EA
1
1
2
1
Only appears when the switch is participating in a stack configuration.
Only appears when a gigabit MDA is installed in one or more units in a stack configuration.
1
2
MAC Address Security Config.
MAC Address Security Port Config.
MAC Address Security Port Lists
MAC Address Security Table