Chapter 3 Using the console interface 209
Using the Business Policy Switch 2000 Version 1.2
Any mix of up to eight Business Policy Switches and BayStack 450 and BayStack
410 switches can be stacked to provide a total of 224 ports (when all MDA slots
are configured with the maximum port avai lability). See Appendix B, for more
information about a mixed stack configuration.
When the trunks are enabled, the trunk members take on default settings
necessary for correct operation of the MultiLink Trunking feature. These default
settings can affect the correct operation of your configured network. If you disable
a trunk, you may need to reconfigure the specific trunk members switch ports to
return to the previous switch configuratio n. See Chapter 1 for more information.
To open the MultiLink Trunk Configuration screen:
➨Choose Trunk Configuration (or press t) from the MultiLink Trunk
Configuration Menu screen.
Figure 75 MultiLink Trunk Configuration screen
MultiLink Trunk Configuration
Trunk Trunk Members (Unit/Port) STP Learning Trunk Mode Trunk Status
----- ----------------------------- ------------ ---------------------------
1 [ / ][ / ][ / ][ / ] [ Normal ] Basic [Disabled ]
2 [ / ][ / ][ / ][ / ] [ Normal ] Basic [Disabled ]
3 [ / ][ / ][ / ][ / ] [ Normal ] Basic [Disabled ]
4 [ / ][ / ][ / ][ / ] [ Normal ] Basic [Disabled ]
5 [ / ][ / ][ / ][ / ] [ Normal ] Basic [Disabled ]
6 [ / ][ / ][ / ][ / ] [ Normal ] Basic [Disabled ]
Trunk Trunk Name
----- ------------------
1 [ Trunk #1 ]
2 [ Trunk #2 ]
3 [ Trunk #3 ]
4 [ Trunk #4 ]
5 [ Trunk #5 ]
6 [ Trunk #6 ]
Use space bar to display choices, press <Return> or <Enter> to select
choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to
Main Menu.