166 Chapter 3 Using the console interface
208700-B
EAPOL Security Configuration... Displays the EAPOL Security Configuration menu (see “EAPOL
Security Configuration screen” on page183). This screen allows you
to set up Extensible Authentication Protocol over LAN (EAPOL)-
based security.
VLAN Configuration... Displays the VLAN Configuration Menu (see “VLAN Configuration
Menu screen” on page 187). This menu provides the following
options: VLAN Configuration, MAC Addresses for MAC-SA Based
VLAN, VLAN Port Configuration, and VLAN Display by Port. This
menu allows you to create and modify VLANs and to enable the
automatic PVID feature.
Port Configuration... Displays the Port Configuration screen (see “Port Configuration
screen” on page 201). This screen allows you to configure a specific
switch port, all switch ports or, when in a stack configuration, all stack
ports.
High Speed Flow Control
Configuration... Only appears when an optional Gigabit MDA is installed in the Uplink
Module slot. When the Gigabit MDA is installed, selecting this option
displays the High Speed Flow Control Configuration screen (see “High
Speed Flow Control Configuration screen” on page204).
MultiLink Trunk Configuration... Displays the MultiLink Trunk Configuration Menu (see “MultiLink Trunk
Configuration Menu screen“on page207). This menu provides the
following options: MultiLink Trunk Configuration and MultiLink Trunk
Utilization. This menu allows you to create and modify trunks, and to
monitor the bandwidth utilization of configured trunks.
Port Mirroring Configuration... Displays the Port Mirroring Configuration screen (see “Port Mirroring
Configuration screen“on page 213). This screen allows you to
designate a single switch port as a traffic monitor for up to two
specified ports or addresses.
Rate Limiting Configuration... Displays the Rate Limiting Configuration screen (see “Rate Limiting
Configuration screen“on page216). This screen allows you to limit the
forwarding rate of broadcast and multicast packets.
IGMP Configuration... Displays the IGMP Co nfiguration screen (see “IGMP Configuration
screen” on page 221). This screen allows you to optimize multicast
traffic by setting up IGMP port memberships that filter multicast on a
per port basis (see Chapter 1 for more info rmation about this feature).
Display Port Statistics Displays the Port Statistics screen (see “Port Statistics screen” on
page226). This screen allows you to view detailed information about
any switch port.
Tabl e 14 Switch Configuration Menu screen options (continued)
Option Description