Chapter 2 Ne twork configuration 145
Using the Business Policy Switch 2000 Version 1.2
Figure 49 Port Mirroring Configuration address-based screen example
Port mirroring configuration rules
The following configuration rules apply to any port mirroring configuration:
•You cannot configure a monitor port as a trunk member or IGMP member.
•A monitor port cannot be used for normal switch functions.
•When you configure a port as a monitor port, the port is automatically
disabled from participating in the spanning tree. When you reconfigure the
port as a standard switch port (no longer a monitor port), the port is enabled
for spanning tree participation.
•When you create a port-based port mirroring configuration, be sure that the
monitor port and both of the mirrored ports, port X and port Y, have the same
configuration. Use the VLAN Configuration screen to configure the VLAN
(see Chapter 3).
Port Mirroring Configuration
Monitoring Mode: [ Address A -> Address B ]
Monitor Unit/Port: [ /23 ]
Unit/Port X: [ / ]
Unit/Port Y: [ / ]
Address A: [ 00-44-55-44-55-22 ]
Address B: [ 00-33-44-33-22-44 ]
Is your port mirroring configuration complete? [ Yes ]
Currently Active Port Mirroring Configuration
---------------------------------------------
Monitoring Mode: -> Address A or Address B -> Monitor Port: 23
Port X: 25 Port Y: 24
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.