Next Prev Select Prompt | Nortel Networks i2022 Series specification

i2022 ISDN Teleset

If the switch supports Auto-SPID, the i2022 will display all of the SPIDs available on the line in the following format:

If the SPID displayed is not the correct SPID for your application, press the Next key.

Pressing the Detail softkey will display the SPID, the Primary Directory Number, and the Bearer Services assigned to the SPID. The detail information is as follows:

1 : SPID=84755547360101 DN=8475554736 Bearer: Speech

Next Prev Select Prompt

MORE is not lit

When the correct SPID is displayed, press the Select softkey to choose it.

NOTE: The last 2 digits of the SPID are known as the TID (Terminal IDentifier). The i2022 automatically inserts the TID at the end of the SPID. The TID is displayed as part of the SPID.

Auto-Download

After the SPID has been accepted by the switch, the i2022 will download the Call Appearance and Feature information from the switch. On completion of the download, the display will momentarily show the following and then continue with the Auto-Install.

15

Image 17

Nortel Networks i2022 Series manual Next Prev Select Prompt, Auto-Download

Contents

I2022 Series Isdn Teleset User’s Guide Trademark Acknowledgment Mandatory Customer InformationFederal Communications Commission FCC Requirements, Part Introduction I2022 Teleset IntroductionAbout this Manual Voice Operation Features Features Parts List InstallationAccessories TR Switch Switch Settings Power SwitchIsdn Interfaces I2022 Equipped with an S Interface Module Powering the i2022 Locally PS1/PS2 Switch Settings Using Lucent 1215B Power Supply PASSIVE-BUS or Multipoint Terminating ResistorsPOINT-TO-POINT Circuits I2022 Equipped with a U Interface Module Line Configuration Inserting and removing the modules Installing the Logo Plate Softkeys Example AUTO-Install Auto-SPID Procedures AUTO-Switch Auto-Download Next Prev Select Prompt Press MENU, MORE, MORE, Config, MORE, MORE, Spid Manually Choose the Switch Type Manually Entering the SpidApplication Spid Pots P+D Data Manual Switch Downloading Manually Programming Call Appearances Page Manually Programming Feature Keys Setting the Contrast Setting UP the TelesetAdjusting the Display Viewing Angle Setting the Backlighting Options Setting the Date and Time Clock Ringing Patterns Enter CA Key or Number Pressed Key Common 2nd Ring Confca Conference Call Appearance PrimCA Primary Call Appearance Intercom Speed Dial Key Assignment Editing a Speed Dial Number Press MENU, Alarm Setting the Alarm Time Setting Protection Levels Password SelectionThere are four levels of password protection Language Options OperationsVoice Operation Terms and Nomenclature Display Window and Menus NON-PROGRAMMABLE Hardkeys and Indicators Answering Incoming Calls Placing CallsDialing Off-Hook Dialing On-Hook Transferring Incoming Calls Hold KEYTRANSFER, Conference and Drop Conferencing an Incoming Call to an Outgoing Call Way Conferencing Conferencing Two Outgoing Calls Directory Teleset FeaturesRedial Directory Changes Setup Directory Searches Dialing Options Setting the Dialing Options Control Type Semi Auto Phone Number 847 Next Change Use Keypad to Enter 1 Nxx Clear Save Dialing from the Call Log Call Records Saving a CalLog Entry to the Directory Dial Prev Edit Clear Party Analog Port Advanced Features Analog Port Sharing the Teleset’s Spid Operation Analog Port on a Separate Spid Configuring Analog Port on a Separate Spid Operation Icons Call Blocking Tone DSS/BLF Direct Station SELECT, Busy Lamp Field DSS/BLF Operation Disabling SoftkeysTo program a DSS/BLF KEY Mapping View Protecting specific keys from an Automatic Download Protecting Keys from Being OverwrittenDisabling the Automatic Download KEY Clicks Disable LoggingTesting Maintaining the Teleset Troubleshooting ProblemsChecking the FW Version Loading FW Calls Blocked GlossaryPage Liquid Crystal Display LCD Index Speaker