Nortel Networks i2022 Series manual 2nd Ring

i2022 ISDN Teleset

Each call appearance can ring with a different sound. This is done by pressing any call appearance key and choosing a ring pattern (0-9) or silent alerting (#) and then pressing Accept. As an example, we press the digit 3 on the keypad or press call appearance 3, then choose a ring pattern or silent alerting(#). We may then choose a default volume setting and then SaVol, Accept.

Select 0-9 or #(Ring Off)

Call Appearance : 3

Pattern 0 ; Select it ?

Accept SaVol

MORE is flashing

The SaVol key sets the default volume level of the ringing pattern. The Ring Pattern returns to this volume setting if the Teleset power is reset. The Ringing Pattern volume may be adjusted at any time by pressing the volume keys while the Teleset is ringing. The Teleset will remember the volume setting until power is reset.

Press MENU to return to the startup screen.

2nd Ring

The 2nd Ring option controls how the Teleset audibly reacts to an incoming call on another Call Appearance when you are already off-hook on an active call. The choices are Continuous Ring, Partial Ring, and No Ring.

With Continuous Ring, the Teleset will sound the 2nd Ring “beep” with every other ring cycle.

With Partial Ring, the Teleset will sound the 2nd Ring “beep” one time only.

With No Ring, there will be no audible ring during the ringing cycle.

NOTE: In all cases the Call Appearance LED will flash, and the display will continue to show the Calling Line ID if available.

To set the 2nd Ring option press MENU, MORE, Ring, 2ndRing

25