Call Blocking Tone, Icons | Nortel Networks i2022 Series manual

i2022 ISDN Teleset

NOTE: The user can place the Analog Port on hold by “flashing” the switchooks (or pressing a flash key) on the phone. Flashing a second time reconnects to the held call.

Outgoing calls can be placed from the Analog Port. The analog icons will show the on-hook/off-hook status of the analog call.

NOTE: The Analog Port supports Touchtone dialing only. It does not support rotary or pulse dialing.

CALL BLOCKING TONE

The i2022 will furnish an audible tone if there is no B-Channel available. This tone will notify the user there is no talk path between the i2022 or the Analog Port to the far end. The Call Blocking Tone will also be delivered to the Analog Port.

ICONS

The i2022 Teleset is equipped with icons to facilitate the operation of the i2022’s features. An icon is a symbol used to give the user a graphical representation of specific features of the i2022.

There are a total of 12 icons located on the top row of the LCD display.

TEST -- The test icons lights whenever the Teleset is in a test mode.

CORDLESS -- The handset portion of the icon will light when the cordless option is installed and programmed. When the cordless phone is in use, the arrow portion of the icon will light along with the handset portion of the icon.

NOTE: The cordless option is not currently available.

WARNING -- Lights if the i2022 has detected a configuration problem.

PASSWORD -- Lights when a password is set

ANALOG

The Analog Call Appearance icon has four states. The first state is off. If the Analog Call Appearance is not assigned the icon will be off.

On-Hook-- The icon on the left is displayed when the Analog Port is programmed and the Analog Call Appearance is on-hook.

Ringing -- The icon in the center is displayed when the Analog Port is programmed and the Analog Call Appearance is ringing.

48

Image 50

Nortel Networks i2022 Series manual Call Blocking Tone, Icons

Contents

I2022 Series Isdn Teleset User’s Guide Trademark Acknowledgment Mandatory Customer InformationFederal Communications Commission FCC Requirements, Part Introduction I2022 Teleset IntroductionAbout this Manual Features Voice Operation Features Parts List InstallationAccessories Isdn Interfaces Switch Settings Power SwitchTR Switch I2022 Equipped with an S Interface Module PS1/PS2 Switch Settings Powering the i2022 Locally Using Lucent 1215B Power Supply PASSIVE-BUS or Multipoint Terminating ResistorsPOINT-TO-POINT Circuits I2022 Equipped with a U Interface Module Line Configuration Installing the Logo Plate Inserting and removing the modules Softkeys AUTO-Install Example AUTO-Switch Auto-SPID Procedures Next Prev Select Prompt Auto-Download Application Manually Choose the Switch Type Manually Entering the SpidPress MENU, MORE, MORE, Config, MORE, MORE, Spid Spid Manual Switch Downloading Pots P+D Data Manually Programming Call Appearances Page Manually Programming Feature Keys Setting the Contrast Setting UP the TelesetAdjusting the Display Viewing Angle Setting the Backlighting Options Setting the Date and Time Clock Enter CA Key or Number Pressed Key Common Ringing Patterns 2nd Ring PrimCA Primary Call Appearance Confca Conference Call Appearance Intercom Speed Dial Key Assignment Editing a Speed Dial Number Setting the Alarm Time Press MENU, Alarm Setting Protection Levels Password SelectionThere are four levels of password protection Voice Operation OperationsLanguage Options Terms and Nomenclature NON-PROGRAMMABLE Hardkeys and Indicators Display Window and Menus Dialing Off-Hook Placing CallsAnswering Incoming Calls Dialing On-Hook Transferring Incoming Calls Hold KEYTRANSFER, Conference and Drop Way Conferencing Conferencing Two Outgoing Calls Conferencing an Incoming Call to an Outgoing Call Directory Teleset FeaturesRedial Setup Directory Changes Directory Searches Setting the Dialing Options Dialing Options Control Type Semi Auto Phone Number 847 Next Change Use Keypad to Enter 1 Nxx Clear Save Call Records Dialing from the Call Log Dial Prev Edit Clear Party Saving a CalLog Entry to the Directory Advanced Features Analog Port Analog Port on a Separate Spid Configuring Analog Port Sharing the Teleset’s Spid Operation Analog Port on a Separate Spid Operation Call Blocking Tone Icons DSS/BLF Direct Station SELECT, Busy Lamp Field DSS/BLF Operation Disabling SoftkeysTo program a DSS/BLF KEY Mapping View Protecting specific keys from an Automatic Download Protecting Keys from Being OverwrittenDisabling the Automatic Download KEY Clicks Disable LoggingTesting Checking the FW Version Troubleshooting ProblemsMaintaining the Teleset Loading FW Glossary Calls BlockedPage Index Liquid Crystal Display LCD Speaker