Nortel Networks i2022 Series manual Introduction, About this Manual, I2022 Teleset

i2022 ISDN Teleset
TABLE OF FIGURES
FIGURE 1: LINE AND POWER JACKS	5
FIGURE 2: NT1 LEADS	6
FIGURE 3: S INTERFACE MODULE	6
FIGURE 4: USING LUCENT 1215B POWER SUPPLY	7
FIGURE 5: POWERING A TELESET (S/T) WITH AN EXTERNAL POWER SUPPLY	7
FIGURE 6: TERMINATING RESISTOR RANGE	8
FIGURE 7: FARTHEST TELESET	8
FIGURE 8: EQUAL DISTANCE TELESETS	9
FIGURE 9: LINE AND POWER JACKS	9
FIGURE 10: U INTERFACE MODULE	10
FIGURE 11: ASSEMBLING THE TELESET	34
FIGURE 12: ASSEMBLING THE TELESET	35
FIGURE 13: ANALOG PORT	45

INTRODUCTION

ISDN i2022 S/T TELESET

Thank you for purchasing the i2022 voice/data Integrated Services Digital Network (ISDN) Teleset. This Teleset meets the highest standards of quality to give you years of excellent service. The i2022 works with your local service provider to give you advanced, easy-to-use features. It is compliant with National ISDN 1, 2 and 3 standards.

ABOUT THIS MANUAL

This manual contains the following information about your new ISDN Teleset:

Features

Installation

Setup

Voice User Operations

Troubleshooting

i2022 Teleset

This Teleset connects to an ISDN Basic Rate S/T Interface. The i2022 Teleset includes an S Interface Module as Standard Equipment. If required, an optional U Interface Module is available.

When equipped with the standard S Interface Module, an external NT1 (Network Terminator) is required. Your local telephone equipment provider may furnish this device.

The optional U Interface Module contains a built-in NT1.

2