Manuals / Nortel Networks / Communications / Telephone

Nortel Networks i2022 Series manual Disabling Softkeys, To program a DSS/BLF, DSS/BLF Operation

Models: i2022 Series

1 61

Download 61 pages 49.97 Kb

Page 52

i2022 ISDN Teleset

PROGRAMMING A DSS/BLF (DIRECT STATION SELECT / BUSY LAMP FIELD) FEATURE

To program a DSS/BLF

1.Ensure the Call Appearances to be used for the BLF are set to General Call Appearances.

2.Press MENU, MORE, MORE, MORE, DSS/BLF

3.Select a Call Appearance. Press it a second time to confirm your selection.

4.Press the SetAddr softkey. If your line is a Centrex line, the DN must be edited. For convenience, 4-digit, 5-digit, and 7-digit dialing options are provided. Use the edit key to effect the changes.

DSS/BLF Operation

After you answer the incoming call, press the Transfer Key. You will receive dial tone. Press the appropriate DSS key and then Transfer. The call will be transferred.

NOTE: When a Call Appearance is programmed as a DSS/BLF, the user cannot bridge onto an active call. The key no longer operates as a Shared Call Appearance.

NOTE: A 32 key add-on module, the EM-32 is available for additional keys. These additional keys can be used for the DSS/BLF.

DISABLING SOFTKEYS

Sometimes a softkey feature will appear on the display and not be available to the user. For example, the PkUp key appears on the display but the Call Pick-Up feature is not available to the user. Other times a user may prefer to have a hardkey and an LED indicator for a feature. Many users prefer moving Call Forward to a hardkey.

To disable a softkey:

Press MENU, MORE, MORE, Config, SetKey, SetFA. The display will show the softkeys and the Feature Activator/Indicator assigned to the feature.

NOTE: The SetKey feature list is local to the Teleset. It will only reflect the current programming of the Teleset. To ensure accuracy, run a Parameter Download (National ISDN only) before using SetKey. See 80 for information on Parameter Downloading

Press the FA softkey to scroll through the list of features.

50

Image 52

Nortel Networks i2022 Series manual Disabling Softkeys, To program a DSS/BLF, DSS/BLF Operation

Contents

I2022 Series Isdn Teleset User’s Guide Federal Communications Commission FCC Requirements, Part Mandatory Customer InformationTrademark Acknowledgment Introduction About this Manual IntroductionI2022 Teleset Features Voice Operation FeaturesAccessories InstallationParts List Switch Settings Power Switch TR SwitchIsdn Interfaces I2022 Equipped with an S Interface ModulePS1/PS2 Switch Settings Powering the i2022 LocallyUsing Lucent 1215B Power Supply POINT-TO-POINT Circuits Terminating ResistorsPASSIVE-BUS or Multipoint I2022 Equipped with a U Interface Module Line Configuration Installing the Logo Plate Inserting and removing the modulesSoftkeys AUTO-Install ExampleAUTO-Switch Auto-SPID ProceduresNext Prev Select Prompt Auto-DownloadManually Choose the Switch Type Manually Entering the Spid Press MENU, MORE, MORE, Config, MORE, MORE, SpidApplication SpidManual Switch Downloading Pots P+D DataManually Programming Call Appearances Page Manually Programming Feature Keys Adjusting the Display Viewing Angle Setting UP the TelesetSetting the Contrast Setting the Backlighting Options Setting the Date and Time Clock Enter CA Key or Number Pressed Key Common Ringing Patterns2nd Ring PrimCA Primary Call Appearance Confca Conference Call AppearanceIntercom Speed Dial Key Assignment Editing a Speed Dial Number Setting the Alarm Time Press MENU, AlarmThere are four levels of password protection Password SelectionSetting Protection Levels Operations Language OptionsVoice Operation Terms and NomenclatureNON-PROGRAMMABLE Hardkeys and Indicators Display Window and MenusPlacing Calls Answering Incoming CallsDialing Off-Hook Dialing On-HookTRANSFER, Conference and Drop Hold KEYTransferring Incoming Calls Way Conferencing Conferencing Two Outgoing Calls Conferencing an Incoming Call to an Outgoing CallRedial Teleset FeaturesDirectory Setup Directory ChangesDirectory Searches Setting the Dialing Options Dialing OptionsControl Type Semi Auto Phone Number 847 Next Change Use Keypad to Enter 1 Nxx Clear Save Call Records Dialing from the Call LogDial Prev Edit Clear Party Saving a CalLog Entry to the DirectoryAdvanced Features Analog PortAnalog Port on a Separate Spid Configuring Analog Port Sharing the Teleset’s Spid OperationAnalog Port on a Separate Spid Operation Call Blocking Tone IconsDSS/BLF Direct Station SELECT, Busy Lamp Field To program a DSS/BLF Disabling SoftkeysDSS/BLF Operation KEY Mapping View Disabling the Automatic Download Protecting Keys from Being OverwrittenProtecting specific keys from an Automatic Download Testing Disable LoggingKEY Clicks Troubleshooting Problems Maintaining the TelesetChecking the FW Version Loading FWGlossary Calls BlockedPage Index Liquid Crystal Display LCDSpeaker