Unpairing a wireless headset 101

step 5. If the search is not successful, turn off the headset and repeat step 3.

5Select Pair

6Press the send key.

A dialog box appears, prompting you to enter a PIN.

7Enter the headset PIN (typically "0000") and press OK.

8To verify that the pairing was successful, scroll through the list to see if the headset appears in the Paired box. If the headset is not successfully paired with the IP Phone, turn it off and repeat step 3.

--End--

Unpairing a wireless headset

Follow this procedure to unpair a wireless headset.

When you complete this procedure, the Bluetooth wireless technology headset is no longer paired with the IP Phone. To use the wireless headset again, perform the pairing and activation procedure, see “Pairing a wireless headset with the IP Phone” (page 99).

Step Action

1Double press the In Calls key or, alternatively, complete the following steps:

a Double-press the Services key.

The Services menu is displayed.

b Select Preferences.

The Preferences menu is displayed. c Select Bluetooth Setup.

The Bluetooth Setup dialog box appears.

2Select Unpair from the menu.

3Press the send key.

4Wait for 8 to 10 seconds.

The Bluetooth wireless technology headset is no longer paired with the IP Phone. To use the wireless headset again, you must perform the pairing and activation procedure, see “Pairing a wireless headset with the IP Phone” (page 99).

--End--

Carrier VoIP

Nortel IP Phone 1150E User Guide (CICM)

NN10300-025 04.01 Standard

24 April 2009

Copyright © 2009 Nortel Networks

Page 101
Image 101
Nortel Networks NN10300-025 manual Unpairing a wireless headset, Select Pair Press the send key