Nortel Networks NN10300-025 manual Logging on to the network

.

23

Logging on

Logging on to the network

Follow this procedure to log on to the network. If the Centrex IP Client Manager (CICM) is set up as part of a group of CICMs, you can choose which CICM to connect to. After you select a gateway, the terminal directs itself at that CICM and the Username screen appears.

If a firmware upgrade for the IP Phone is available, the system prompts you to upgrade when you log on. If the firmware level is between the minimum and maximum level set by the administrator, Yes and No options appear on the soft keys. If the terminal is below the minimum level, the only option available is Yes. You cannot log on until you perform the upgrade.

To perform an upgrade, see “Performing a firmware upgrade” (page 85).

Step Action

1If the Selective Gateway Login feature is configured on your system, navigate through the list to select the gateway.

2When the gateway you want appears, press Ok, or start entering your user name.

If the Username screen appears when you start to enter your user name, the characters you already entered appear at the beginning of the Username field.

3If you make a mistake, press Clear to clear the field, and then enter the user name again.

If your user name is too long for the display (longer than 15 characters), the digits scroll to the left and an ellipsis appears to the left of the user name.

4Press Ok, or press the send key. The Password screen appears.

5Enter your password. For security, the password characters are displayed as asterisks (*).

Carrier VoIP

Nortel IP Phone 1150E User Guide (CICM)

NN10300-025 04.01 Standard

24 April 2009

Copyright © 2009 Nortel Networks