Nortel Networks NN10300-025 Using conference call, Using the mute feature, Call is transferred

50While on a non-ACD call

Step Action

1During a call, press the key to which the transfer feature is assigned.

The call is put on hold and a dial tone sounds. On the display, an indicator flashes beside the line on which the call is held.

2Enter the number to which to transfer the call.

3When that number rings or is answered, press the transfer key again.

The call is transferred.

--End--

Using conference call

Follow this procedure to engage in a conference call.

The Three Way Call (3WC) feature allows you to add three calls to a conference. If six-port conference is available, you can add a maximum of six calls to a conference. If six port conference is available, Conference appears beside a feature key in the display.

Step Action

1During a call, press the key to which the conference call feature is assigned, either 3WC or Conference.

The call is put on hold and a dial tone sounds. On the display, an indicator flashes beside the line on which the call is held.

2Dial the number of the person you want to add to the call.

At this time, you can talk privately to the person you are adding, to announce the conference.

3Press the conference key again to merge the calls.

4Repeat steps 2 and 3, to add more calls to the conference.

5If you make a mistake dialing, or a party does not want to be included in the conference, press the extension key of the conference call to reconnect to the conference.

--End--

Using the mute feature

Muting prevents the transmission of sounds through the microphone. Follow this procedure to use the mute feature.

Carrier VoIP

Nortel IP Phone 1150E User Guide (CICM)

NN10300-025 04.01 Standard

24 April 2009

Copyright © 2009 Nortel Networks