Nortel Networks NN10300-025 manual Interaction with wired headsets

102Configuring Bluetooth wireless headsets

Interaction with wired headsets

A Bluetooth wireless technology headset can work only when it is within range of the IP Phone. When a wireless headset approaches the end of its radio range, the audio quality degrades and radio interference noise increases. When the wireless headset is in connecting range, the In Calls key controls the wireless headset, even if a wired headset is attached. If a wireless headset moves out of connecting range, a special beep sounds in the headset indicating the connection is lost.

If you connect a Bluetooth wireless technology headset and a wired headset to the same IP Phone, the two interact as follows:

•When a wireless headset is paired with the set, but is not in range, the wired headset works as normal.

•You can select which headset the IP Phone uses, by checking the Use Bluetooth Headset check box.

Switching between a wireless and a wired headset

Follow this procedure to disable the wireless headset, without losing the pairing or disabling it.

If a Bluetooth wireless technology headset is connected, and you want to use the wired headset, you can switch between the two. It is not necessary to unpair or disable the wireless headset.

You can switch between a wired and wireless headset anytime. The IP Phone does not have to be idle, and you do not have to be engaged in a call.

Step Action

1Double press the In Calls key or, alternatively, complete the following steps:

a Double-press the Services key.

The Services menu is displayed.

b Select Preferences.

The Preferences menu is displayed. c Select Bluetooth Setup.

The Bluetooth Setup dialog box appears.

2Uncheck the Use Bluetooth headset check box and press the Exit key or, alternatively, uncheck the Enable Bluetooth check box.

Carrier VoIP

Nortel IP Phone 1150E User Guide (CICM)

NN10300-025 04.01 Standard

24 April 2009

Copyright © 2009 Nortel Networks