Nortel Networks NN10300-025 manual Bluetooth headset feature activation

Bluetooth headset feature activation 103

If you uncheck the first option and press the Exit key the wired headset/handset will work after several seconds. If you uncheck the second option you can immediately switch to the wired headset/handset.

A check mark indicates that the wireless headset is active. Clear the check mark to use a wired headset/handset. This option is on (o) by default.

3Press the Exit key to toggle this option on or off.

--End--

Bluetooth headset feature activation

Feature activation using a Bluetooth wireless technology headset paired with an IP Phone may be different from the headset manufacturers instructions. When paired with an IP Phone the following limitations apply:

•Feature activation on an IP Phone paired with a BT headset depends on server implementation.

•Call Transfer from headset to handset does not work in a handsfree profile.

•The administrator must provision Auto Answer on Ring against the user to use the Call answer functionality.

Call answer

Follow this procedure to answer an incoming call using a headset.

Step Action

1When there is an incoming call, press the In Calls key. The incoming call is connected to the headset.

2Press the Goodbye key to terminate the call.

--End--

Carrier VoIP

Nortel IP Phone 1150E User Guide (CICM)

NN10300-025 04.01 Standard

24 April 2009

Copyright © 2009 Nortel Networks