Nortel Networks NN10300-025 Services menu is displayed, Configuring Bluetooth wireless headsets

100Configuring Bluetooth wireless headsets

Prerequisites

Bluetooth wireless technology must be available for use on your phone. Check with your administrator.

To perform this procedure, you need information provided with the headset documentation.

•You must put the Bluetooth technology headset in pairing or search mode. For a Sony Ericsson HBH-662 Bluetooth earphone, the steps are included in this procedure. For other headsets, refer to the headset documentation or contact the vendor for this procedure.

•In the following procedure, step 7 requires you to enter the headset PIN (sometimes called a passkey). You can find this information in the headset documentation. Typically this value is 0000.

Step Action

1Double press the In Calls key or, alternatively, complete the following steps:

a Double-press the Services key.

The Services menu is displayed.

b Select Preferences.

The Preferences menu is displayed. c Select Bluetooth Setup.

The Bluetooth Setup dialog box appears.

2Ensure the Enable Bluetooth and Use Bluetooth Headset check boxes are enabled.

3Put your Bluetooth technology headset in its pairing or search mode. If your headset is a Sony Ericsson HBH-662 Bluetooth earphone, perform these steps (for other types, refer the documentation provided with the headset):

a Turn the headset on by pressing the power key in the front panel of the headset.

b Press and hold the plus (+) and minus (-) keys at the same time until a searching mode picture/flash shows on the earphone display.

4Perform these steps to search for the paired headset: a Select Search in the Bluetooth Setup screen.

b Press the send key.

A searching message is displayed.

If the search is successful, the name of the headset appears in the Found combo box and you can proceed to

Carrier VoIP

Nortel IP Phone 1150E User Guide (CICM)

NN10300-025 04.01 Standard

24 April 2009

Copyright © 2009 Nortel Networks