Nortel Networks NN10300-025 manual Using the Inbox, Follow these procedures to use the Inbox

.

91

Using the Inbox

The IP Phone 1150E has a dedicated fixed key for the Inbox. The system logs the incoming key name, number, time and date, as well as the display shown on the IP Phone at the time of the incoming call. The information from the display is captured only if the call lasts longer than two seconds.

The Inbox can store a maximum of 10 calls. When the maximum is reached, the oldest call is dropped. Calls appear in the list in the order in which they were received, with the most recent call at the top of the list. Use the up and down navigation keys to scroll through the list.

The call display consists of a time or date stamp, and a name or number. A time stamp appears beside calls you receive on the same day on which you view the Inbox. A date stamp appears beside calls that arrive prior to the day of viewing. If no name or number was extracted from the display, a No Details message appears.

If you missed a call and the caller did not leave a voice message, the message waiting lamp is illuminated without interruption. If you missed a call and the caller left a voice message, the message waiting lamp may be turned on without interruption, or it may flash, flicker, wink, twinkle or blink, depending on the arrangements made by the system administrator. The lamp turns off after you retrieve the waiting message.

See Figure 1 "IP Phone 1150E components" (page 10) for the location of the key.

Follow these procedures to use the Inbox.

Navigation

•“Accessing the Inbox” (page 92)

•“Viewing Inbox call information” (page 92)

•“Storing a number from the Inbox” (page 93)

•“Using the Inbox to make a call” (page 93)

Carrier VoIP

Nortel IP Phone 1150E User Guide (CICM)

NN10300-025 04.01 Standard

24 April 2009

Copyright © 2009 Nortel Networks