Configuring Bandwidth Management parameters 103
Select the zone on the Zones web page (see Figure 30 "Zones web" (page
105)) and click VGW and IP phone codec profile. Select an existing
codec or configure a new one in the VGW and IP phone codec profile
section, shown in Figure 29 "Configuring a codec" (page 103). See IP
Peer Networking Installation and Commissioning (NN43001-313) for full
instructions on configuring a codec.
Figure 29
Configuring a codec
Configuring Bandwidth ManagementThe steps to configure Bandwidth Management on the Call Server are as
follows:
Step Action
1Define a VPNI number in LD 15.
2Configure the Bandwidth Management parameters for each zone on
the Call Server using either Element Manager (see "Configuration
using CS 1000 Element Manager" (page 104)) or LD 117 (see
"Configuration using LD 117" (page 105)).
•Call Server zones that will be used for endpoints (telephones
and gateways) with the followingproper ties:
Nortel Communication Server 1000
Main Office Configuration Guide forSRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright© 2005-2007, Nor tel Networks
.