Configuring the dialing plan for PSTN access to SRG users in Normal Mode 53
Prompt Response Description
CUST xx Customer number as defined in LD 15.
FEAT DGT Digit manipulation data block
DMI 1-999 Digit Manipulation Index numbers
The maximum number of Digit Manipulation tables is defined at
the MXDM prompt in LD 86.
DEL (0)-19 Number of leading digits to be deleted, usually 0 at the main
office.
INST xxInsert. Up to 31 leading digits can be inserted, usually none at
the main office. Default is none.
ISPN IP Special Number
(YES) For off-net calls
NO For on-net calls
CTYP Call type to be used by the call. This call type must be
recognized by the NRS and far-end switch. This is critical for
correct CLID behavior.
If ISPN=NO, the CLID is based on this field. If ISPN=YES, the
CLID is based on the call type before digit manipulation.
SPN For off-net calls (ISPN=YES)
LOC For on-net calls (ISPN=NO)
b. Configure the RLIin LD86 with theRLB feature.
LD 86 Configure Route List Index.
Prompt Response Description
REQ NEW Add new data.
CUST xx Customer number as defined in LD 15.
FEAT RLB Route List data block
RLI Route List Index to be accessed
0-127 CDP and BARS
0-255 NARS
0-999 FNP
ENTR 0-63 Entry number for NARS/BARS Route List
XPrecede with x to remove
LTER NO Local Termination entry
ROUT Route number of the Virtual Trunk as provisioned in LD 16.
Nortel Communication Server 1000
Main Office Configuration Guide forSRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright© 2005-2007, Nor tel Networks
.