Configuring Bandwidth Management parameters 105
Figure 30
Zones web
Configuration using LD 117A new Bandwidth Management zone is configured in LD 117 using the
NEW ZONE command. An existing zone can be modified using the CHG
ZONE command.
LD 117 Configure a new or existing Bandwidth Management zone.
Command Description
NEW | CHG ZONE <zoneNumber> [<intraZoneBandwidth> <intraZoneStrategy>
<interZoneBandwidth> <interZoneStrategy> <zoneIntent> <zoneResourceType>]
Configure a new zone (NEW) or change (CHG) an existing zone, where:
•zoneNumber = 0-255
•intraZoneBandwidth = Available intrazone bandwidth (Kbit/s); Nortel
recommends this value be set to the maximum value.
•intraZoneStrategy = BB (Best Bandwidth) or BQ (Best Quality); Nortel
recommends this value be set to BQ.
•interZoneBandwidth =
— For Call Server zone = Maximum bandwidth usage (in Kbit/s)
allowed between peer Call Servers
— For Virtual Trunk zones = 1000000 (Kbit/s)
•interZoneStrategy = BB (Best Bandwidth) or BQ (Best Quality); Nortel
recommends this value be setto BB to conserve interzone bandwidth.
•zoneIntent = type of zone, where:
— MO = Main Office (Call Server) zone
— BMG = Branch Media Gateway (for branch office zones)
— VTRK = Virtual Trunk zone
•zoneResourceType = resource intrazone preferred strategy, where:
Nortel Communication Server 1000
Main Office Configuration Guide forSRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright© 2005-2007, Nor tel Networks
.