Configuring the dialing plan for PSTN access to SRG users in Normal Mode 55
Prompt Response Description
SPN x…xSpecial Number translation
Enter the SPN digits in groups of 3 or 4 digits, separated by a
space (for example, xxxx xxx xxxx). The SPN can be up to 19
digits long.
The maximum number of groups allowed is 5.
FLEN (0)-24 Flexible Length
The number of digits the system expects to receive before
accessing a trunk and outpulsing these digits.
…
- RLI 0-999 Route List Index configured inLD 86 (see step 3)
- CLTP Typeof call that is defined by the special number.
LOCL Local PSTN
NATL National PSTN
INTL International PSTN
—End—
After configuring the zone-based digit manipulation (step 1 and step 2)
and specialized route (step 3), the route must be associated with the ESN
Special Number. The main office ESN Special Number configuration is
based on new digits inserted by zone-based digit manipulation. The digits
are processed based on the Access Code, AC1 or AC2, that was dialed.
For off-net calls the following should be considered:
•If all calls that have undergone Zone-based digit manipulation are to be
routed by the NRS, one SPN must be provisioned for each call type to
route calls to the NRS based on the ZDP.
•If some calls are to be routed by the NRS, and others by the main office
Call Server, multipleSPN should be provisioned to route calls based on
the ZDP value and one or more dialed digits. Each SPN can then use
a different RLI if required.
For example, assume ZDP = 101. It is possible to provision multiple
SPN (1011, 1012, 1013, 1014, 1015, 1016, 1017, 1018, 1019, and
1010) to route calls based on the ZDP value plus the first dialed digit.
However,it may not be necessary to provision all SPN combinations.
For example,if callsdialed witha first digit of 3 after the Access Code
are invalid, then SPN 1013 does not need to be provisioned.
Nortel Communication Server 1000
Main Office Configuration Guide forSRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright© 2005-2007, Nor tel Networks
.