38 Setting up the main office
Figure 4
Zone Time Difference and Time web page
Zone parameters must be configured on the main office and the branch
office. For information on configuring zones, see "Bandwidth Management"
(page 95).
Branch office IP Phone configuration at the main officeAfter the branch office zones and passwords are provisioned, provisionthe
branch office IP Phones at the main office. These can be provisioned using
TelephonyManager 3.1. See "Branch office IP Phone configuration using
TelephonyManager 3.1" (page 38)or LD 11. See Procedure 2 "Configuring
branch office IP Phones at the main office usingLD 11" (page 39).
ATTENTION
There is no automatic data synchronization between the main office Call Server
and SRG. The technician must provision the telephone on both the Call Server
and the SRG.
Branch office IP Phone configuration using TelephonyManager 3.1
At the main office, TelephonyManager 3.1 can be used to configure branch
office IP Phones. Use Telephone Pages to configure the telephones to
include the following:
•Terminal Type
•TN
Nortel Communication Server 1000
Main Office Configuration Guide forSRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright© 2005-2007, Nor tel Networks
.