200 Emergency Services configuration
LD 90
Prompt Response Description
REQ NEW CHG Add,Change
CUST xx Customer number as defined in LD 15
FEAT NET Network translation tables
TRAN aaa
TYPE SPN
- SPN 911 AC + ESDN is recognized as an Emergency Service Access call.
112 Use the number configured for ESDN.
- RLI xxx Route List Index.
Use Route List Index configured in LD 86.
—End—
Procedure 16
Configuring the branch office zone
Step Action
1Configure the branch office zone on the branchoffice.
In the branch office, only the zone number and bandwidth/codec
selection is configured.
Use the same zone number between the branch office and main
office. The main office configuration (Procedure 15 "Configuring the
main office" (page 195), step 6) provides the branch office zone
characteristics (local time, local dialing, and ESA).
2Configure the routing tables on the SRG.
The SRG must recognize the incoming digits on the Virtual Trunkand
remove all butthe ESDN. The call is routed to a local termination.
—End—
Emergency Services for Virtual OfficeThe E911 Virtual Office feature allows Virtual Office users, whether they are
logged in or logged out of Virtual Of��ce to place an emergency (E911) call
to the correct Public Safety Answering Point(PSAP) for their geographical
location.
Nortel Communication Server 1000
Main Office Configuration Guide forSRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright© 2005-2007, Nor tel Networks
.