159
Alternative Call Routing for NetworkBandwidth ManagementContents This section contains information on the following topics:
•"Description" (page 159)
•"Operating parameters" (page 174)
•"Feature interactions" (page 175)
•"Feature packaging" (page 176)
•"Feature implementation using Command Line Interface" (page 176)
•"Feature implementation using Element Manager" (page 178)
•"Diagnostics" (page 180)
•"Maintenance" (page 184)
•"Feature operation" (page 187)
Description Alternative Call Routing for Network Bandwidth Management (NBWM) is
availablefor CS 1000 Release 4.5 andCS 1000Release 5.0 .
Alternative Call Routing for Network Bandwidth Management (NBWM)
allows a station-to-station call (that is, a call that does not use a trunk)
between a branch office and main office to overflowto traditional routes.
Overflow can occur if there is insufficient interzone bandwidth available
to carry the call or if the Quality of Service (QoS) has degraded to
unacceptable levels. The feature also applies to station-to-station calls
from one branch office to another branch office, provided both stations are
registered to the same main office.
Figure 65 "Example of Alternative Call Routing for NBWM in operation"
(page 160) shows a diagram of a typical network where Alternative Call
Routing for NBWM can be used. It illustrates the sequence of events that
are explained in the information following the diagram.
Nortel Communication Server 1000
Main Office Configuration Guide forSRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright© 2005-2007, Nor tel Networks
.