Emergency Services Access 197
provides CLID Verification(CLIDVER) reports that determine how anemergency call is routed, without actually routing the call. Use LD20 to generate a CLIDVER report.
Tabl e 20
LD 20 Generate a CLIDVER report
Prompt Response Description
REQ: PRT Print
TYPE CLIDVER CLID Verification
SORTBY (DN) TN The output/report is sorted
based on this flag.
If the response is DN, the
overlay prompts the user to
enter the DN, and the output
is sorted by the DN. If the
response is TN, the overlay
prompts the user to enter the
TN and the output is sorted by
the TN.
ESA_ONLY (YES) NO Flag used to decide if the report
should contain information for
ESA call type only or for all call
types.
If the ESA package is restricted,
this input prompt does not
appear. The report contains
non-ESA data only.
SHORT (YES) NO Flag used to decide if the output
report should be a Short report
of a Detail report.
TN Terminal Number
lscu Format for Large System,
where l = loop, s = shelf, c =
card, and u = unit
CUST xx Customer number as defined in
LD 15.
DN xxDirectory Number. If no value is
entered, the report includes all
supported Directory Numbers.
DATE dd mmm yyy Date
PAGE (NO) YES Data printed on a per page
basis.
DES ddDesignator
Nortel Communication Server 1000
Main Office Configuration Guide forSRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright© 2005-2007, Nor tel Networks
.