Configuring the dialing plan for PSTN access to SRG users in Normal Mode 57
>LD 90
REQ NEW
CUST 0
FEAT NET
TRAN AC1
TYPE SPN
SPN 1011
FLEN 14 11 digits for long-distance + 3 digits for ZDP
…
RLI 10
CLTP NATL
…
SPN 1015
FLEN 10 7 digits for long-distance + 3 digits for ZDP
…
RLI 30
CLTP LOCL
…
SPN 1016
FLEN 10 7 digits for long-distance + 3 digits for ZDP
RLI 30
CLTP LOCL
…
After configuring main office routing to the NRS, the NRS database must
be provisioned to identify the desired endpoint for the calls. This procedure
configures the NRS database with the inserted digits specified by the
zone-based digit manipulation configuration.
Instead of configuring the NRS database, you can configure a route in the
main office to directly route the call (see step 4).
This procedure provides information specific to the configuration of the
NRS database for this application. See IP Peer Networking Installation and
Commissioning (NN43001-313) forcomplete details on configuring the NRS.
Procedure 4
Configuring the NRS database
Step Action
1Click the Configuration tab in NRS.
2Click set Standby DB view to work in the standby (inactive)
database.
3Select Routing entries from the navigation menu on the left-hand
side of the Network Routing Service window.
Nortel Communication Server 1000
Main Office Configuration Guide forSRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright© 2005-2007, Nor tel Networks
.