Network using Uniform Dialing Plan 143
Figure 53
Call to remote branch office on destination side
1. Main office B determines that LOC 444 is to a local branch office with
prefix 225. The system transmits 225-444-3456 to the NRS. The NRS
checks its provisioning, and determines that this call goes to branch
office B1.
2. The main office sends the call to 225-444-3456 to the branch office.
The branch office deletes the prefix, discovers the call is to its HLOC,
deletes the HLOC, and rings set 3456.
Summary of provisioning procedures for Tandem BandwidthManagementUse Procedure 9 "Provisioning TandemBandwidth Management" (page
145) to provision the network.
Step Action
1Enter the main office Gateway endpoint identifier in the Tandem
Endpoint field for each branch office gateway configured on the
NRS. This provides tandeming for outbound calls from a branch
office through its main office. See Step 1.
2Plan the gateway routing prefixes,if not already done. At least one
prefix is needed per branch office, although any branch offices that
have aprefix for ESA 911 calls does not necessarily require another.
(These prefixes will be SPN - Special Number - entries.) See Step 2.
3Provision the NRS to send all calls to a LOC without a gateway
routing prefix to the main office of that LOC, or to the main office
Nortel Communication Server 1000
Main Office Configuration Guide forSRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright© 2005-2007, Nor tel Networks
.