Emergency Services Access 193
11 Configure ESA at the branch office.
12 Configure the branch office zone on the branchoffice.
The branch office zone is required for bandwidth management but
does not require ESA parameters.
13 Configure the ESN SPN on the branch office.
14 Configure the NRS for the ESA Special Number used.
15 TestESDN using an analog (500/2500-type) telephone located at
the branch office.
16 TestESDN using an SRG IP Phone in Normal Mode and in Local
Mode.
—End—
At the SRG, or branch office:
Step Action
1Configure the SRG emergency trunk (CAMA or PRI).
2Configure the Virtual Trunk at the MG 1000B.
3Configure ESN at the branch office.
4Configure ESA at the branch office.
5Configure the branch office zone on the branchoffice.
The branch office zone is required for bandwidth management but
does not require ESA parameters.
6Configure the ESN SPN on the branch office.
7Configure the NRS for the ESA Special Number used.
8TestESDN using an analog (500/2500-type) telephone located at
the branch office.
9TestESDN using an SRG IP Phone in Normal Mode and in Local
Mode.
—End—
Nortel Communication Server 1000
Main Office Configuration Guide forSRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright© 2005-2007, Nor tel Networks
.