74 Dialing Plan configuration
FEAT ESN
CDP YES
MXSC 50
NCDP 4
DLTN YES
Configure the CDP Distant Steering Code (DSC) in LD 87.
>LD87
REQ NEW
CUST 0
FEAT CDP
TYPE DSC
DSC 50
FLEN 4
RLI 12
Toconfigure the NRS (H.323 Gatekeeper/SIP Redirect Server):
Create CDP Domain: MO_BO_CDP.
Create H.323/SIP endpoints: MO, BO.
Create Numbering Plan entries in CDP Domain:
Add 40 for endpoint BO.
Add 30 for endpoint MO.
Add 42 for endpoint MO.
For information about configuring H.323/SIP Redirect Server, see IP Peer
Networking Installation and Commissioning (NN43001-313).
Toconfigure the SRG:
Configure DN and BUID as the same number on each of the redirected
IP Phones. For example, DN/BUID = 42XX.
Set the main office VoIP TrunkAccess code to 3. For example, main
office VoIP trunk access code = 3.
Set the destination code for the VoIPtrunk to 30 (retain alldigits) or 34
(remove first digit). For example, BUID dialout = 342XX.
The VoIProute destination codes 30 (no digits dropped) and 34 (1 digit
dropped) route any call that starts with 30 or 34 out of the system over
the VoIP trunk to the main office.
The main office access code length is still 0.
Assign the telephones registered to the SRG (IP Phones or analog
[500/2500-type]) telephones to a different range, such as 40XX. See the
NRS configuration above.
Nortel Communication Server 1000
Main Office Configuration Guide forSRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright© 2005-2007, Nor tel Networks
.