Zone parameters 35
Tabl e 6
Configure Customer Data Home Location Code and Virtual Private Network Identifier
Prompt Response Description
REQ: CHG Changing existing data
TYPE: NET ISDN and ESN Networking options
CUST Customer number
0-99 Range for Large Systems
…… …
CLID YES Allow Calling Line Identification option
-ENTRY xx CLID entry to be configured
--HLOC 100-9999999 Home Location code (ESN) (3-7 digits)
ISDN YES Integrated Services Digital Network
-VPNI (0)-16383 Virtual Private Network Identifier for Bandwidth
Management feature
X = Disables feature
1-16383 = Enables feature
<cr> = No Change
2Configure the zone properties for IP Telephony bandwidth
management. Use LD 117 or Element Manager. See IP Peer
Networking Installation and Commissioning (NN43001-313).
The branch office zone number and zone bandwidth management
parameters at the main office must match the corresponding branch
office zone number and zone bandwidth management parameters
at the branch office.
ATTENTION
Zone 0, the defaultzone, must not be configured as a branch office zone.
Network Bandwidth Management does not support zone 0. If zone 0 is
configured as an branch office zone,the Bandwidth Management feature
is not activated.
3Define the zone parameters for the branch office. Use LD 117
or Element Manager. See IP Peer Networking Installation and
Commissioning (NN43001-313).
LD 117 Define zone parameters for the branch office
Command Description
CHG ZBRN <Zone> <yes|no>
Nortel Communication Server 1000
Main Office Configuration Guide forSRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright© 2005-2007, Nor tel Networks
.