Removal of Transport Materials
1.Remove any adhesive tape from the outside surfaces of the machine.
2.Press down the cover release tab (1) and lift the top cover to the fully upright position.
➊
5.Pull the paper feeder (1) towards the front of the machine to open the feeder. Pull out the sheet of transit paper (2) from the paper feeder.
➋
➊
6.Push the feeder (1) towards the rear of the machine to close it.
3.Pull out the sheet of transit paper from under the paper feed roller (2).
➋
7.Install the paper support (3) into the slots at the rear of the paper feeder (1).
➌
➊
➍
4. Lower the top cover and press down firmly to close. | 8. Pull out the paper catch tray (4) to accomodate the size |
of recording paper you will use. |
10
