Transmission After Voice
This method of transmission is used if you have been in conversation with the remote party, and you then wish to send a fax before hanging up.
1.Load your document face down, top first, into the document feeder.
2.Ask the remote party to press their Start key.
3.Press [START] while still keeping your telephone off hook.
4.Wait for the message “TRANSMITTING” to appear in the display.
5.Hang up the telephone handset.
Dialling with the Numeric Keypad
This method is used to send fax messages to infrequent destinations (frequent destinations may be programmed into the Quick Dial feature).
1.Prepare your document to send as described earlier (see Prepare to Send).
With your document loaded, the display will read:
QUICK:_■ KEYPAD
or
DIAL: KPAD/QUICK
2.Press [QUICK] if necessary, so that the display reads:
DIAL: KPAD/QUICK
3.Dial the number you require using the numeric keypad. If you enter an incorrect digit, press [CLEAR] to erase it.
If you are connected via an internal telephone exchange which requires an access digit (usually 9) for an outside line, followed by a short pause, press [PAUSE] after the access digit. This will appear in the display as
4.Press [START] to commence dialling.
28