Statutory User Information (UK only)
The OKIFAX 740 is approved for connection to telecommunications systems specified in the instructions for use subject to the conditions set out in them. The BABT approval number for the OKIFAX 740 is:
The OKIFAX 740 has a REN (ringer equivalence number) value of 1. The REN is a customer guide indicating the maximum number of apparatus that should be simultaneously connected to the line. The total REN values of each of the items of apparatus must not exceed a REN value of 4. This value includes a telephone which, unless otherwise stated, has a REN value of 1.
This apparatus has been approved for the use of the following facilities:
•manual call initiation
•operation in the absence of proceed indication
•auto answer
•modem
•series connection
•simple telephone
Any other usage will invalidate the approval of the apparatus if as a result it ceases to conform to the standards against which the approval was granted.
Interconnection circuits should be such that this equipment continues to comply with the requirements of 4.2 of EN 41003 for TNV circuits and 2.3 of EN60950 for SELV circuits after making connections between circuits.
Interconnection points ‘Line/TEL1/TEL2’ are for connection to TNV circuits, and the ‘Power Inlet Socket’ is for connection to a
The apparatus has been approved for connection to the public switched telephone network provided by British Telecommunications Plc, Kingston Communications Plc, or Mercury Communications Ltd.
The OKIFAX 740 may be connected to any direct PSTN exchange line except as an extension to a payphone. The exchange line must provide facilities for either loop- disconnect or
73
