Notes on Recording For Voice Recognition 
When recording voice to be processed with voice recognition, set up your DSS recorder as follows to improve recognition accuracy.
•Set the microphone sensitivity to “DICTATION” (☞ P.25).
•Set the recording mode other than “LP” mode (☞ P.22).
•Set the Variable Control Voice Actuator (VCVA) to “OFF” (☞ P.23).
•Register/enroll your voice in the voice recognition software using the recorder.
•Record in a relatively quiet environment.
•Have the recorder microphone 5 to 10 cm away from your chin.
•Speak normally.
•When your voice is to be recorded, and reduce the influence of the surrounding noise, set the recording mode to “HQ” or “SP”, and use the ME12 microphone for dictation recording.
The file recorded in the next condition, will be a low rate of recognition, which can not be used for voice recognition.
•A conference or meeting where many voices are recorded.
•Seminar or lecture where
Using Voice
Recognition Software
8
